Ford Transit Custom remap Worksop
130 → 170 bhp · 385 → 430 Nm · £300 – £375 · on your driveway
The Transit Custom is our most-booked van. The 130 PS EcoBlue is deliberately throttled compared with the 170 variant, so a Stage 1 unlocks a huge amount — more torque when loaded, less gear-hunting on the A52/A38 and typically a few extra MPG on the daily run.
Stock vs Stage 1
Ford Transit Custom remap figures
- Engine
- 2.0 EcoBlue turbo diesel (105 / 130 / 170 PS)
- Years
- 2016–2023
- ECU
- Continental SID211 / Bosch MD1
- Gearbox
- 6-speed manual or SelectShift auto
Indicative figures from our calibration data for this platform. Your car is baseline-logged and verified on the day.
What we change
Inside the Transit Custom Stage 1 file
- ▸Boost and turbo control raised to the 170 PS hardware limit
- ▸Injection quantity and rail pressure re-scaled
- ▸Torque limiters per gear lifted for loaded driving
- ▸Throttle response improved off idle
- ▸Smoke correction tuned for cleaner DPF regens
Pre-map checks
What we check on a Transit Custom first
- ▸DPF soot load and regen history
- ▸EGR valve and cooler condition
- ▸Turbo actuator and boost hold on baseline log
- ▸Oil dilution level (EcoBlue known issue)
- ▸Injector correction values
Found a fault? We quote the fix separately via mobile diagnostics — we never map an unhealthy car.
Why Worksop Transit Custom owners remap with us
Bassetlaw is working-vehicle country: pick-ups and Transporters on sites and farms around Worksop, Retford and Carlton-in-Lindrick, plus a steady flow of A57 and M1 J30/J31 commuters into Sheffield and Nottingham in 320ds and A4s. Both groups want the same thing from a Stage 1 — more torque low down, fewer downshifts and better MPG — and both can have it done on the drive without a trip south.
The Ford Transit Custom is one of the vehicles we tune most around Worksop, so the calibration is refined over many local data-logs on the A57, A60, A619 and M1 junctions 30–31 — not a generic file. Every Transit Custom gets a pre-map health check, VIN-specific write and a logged verification drive on your local roads.
◉ The process
How mobile remapping works in Worksop
Fixed quote from your reg
Send your registration by WhatsApp, phone or the booking form. You get a fixed, vehicle-specific price for Worksop — not a 'from' figure that climbs on the day.
We come to you
We arrive at your home, workplace or yard anywhere in Worksop with genuine, licensed tuning tools (not clone hardware) and a professional data-logger.
Pre-map health check
Full OBD diagnostic scan and live-data baseline log. If the DPF, EGR, turbo or sensors show a problem, we tell you before writing anything.
Read & archive your original file
Your factory ECU file is read and archived securely so the car can be returned to stock at any time — before a dealer visit or when you sell.
VIN-specific calibration written
The remap is written for your exact ECU, engine and hardware — fuelling, boost, torque limiters and timing adjusted within safe factory tolerances.
Logged verification drive
A post-map road test on local Worksop roads with live data-logging. You see the before/after figures and we check knock, EGTs, boost and fuel trims are all where they should be.
◉ FAQ
Ford Transit Custom remap Worksop — FAQ
Can you remap a 105 PS or 130 PS Transit Custom to 170 PS?
Yes — the hardware is the same across the EcoBlue range, so a Stage 1 safely takes a 130 to around 170 bhp and a 105 to around 150 bhp.
Will a van remap improve MPG?
Usually yes — 2–4 mpg on a mixed run is typical because the van no longer needs to be revved to pull. Fully loaded and driven hard, consumption is similar to stock.
Can you map a fleet of Transit Customs in one visit?
Yes. We regularly do several vans at one yard with per-vehicle before/after logs. Ask about fleet pricing for 3+ vehicles.
How much does a Ford Transit Custom remap cost in Worksop?
A Stage 1 remap on a Ford Transit Custom in Worksop is £300 – £375, fixed before we book. That includes the pre-map health check, VIN-specific calibration, logged verification drive and 30-day warranty. Gearbox tuning, where available, is quoted separately.
Do you come to me in Worksop to remap a Transit Custom?
Yes — we're fully mobile. We'll map your Transit Custom on your driveway or at work anywhere in Worksop, including Retford, Carlton-in-Lindrick, Shireoaks, Rhodesia, Manton, Gateford.
Do I need to tell my insurer about a Transit Custom remap?
Yes — any ECU modification must be declared. Most mainstream insurers accept a Stage 1 with a small premium adjustment. We can supply a written spec for your insurer.
Can the Transit Custom be returned to standard?
Yes. Your original file is archived and a return-to-factory takes around 30 minutes, at any time.
Stage 1 results
Other diesel remaps in Worksop
Manufacturer stock output vs our typical Stage 1 calibration for each platform. Indicative figures — every car is health-checked and verified with a live road data-log, and your before/after numbers are shown to you on the day.